Repairing Aqara Temperatur Sensors to new Zigbee Stick

1

Hi,

i paired about 10 Aqara Temperatur Sensors to a CC2531 stick.
I recently switched to a CC2652 Stick. None of the sensors join the network but new (not recently joind sensors) do join.
I tried resetting / rejoining the sensors but dont know how to troubleshoot the problem.
Any tips for me? :slight_smile:

Thanks,
Johannes

2

Did you change the PAN ID of the network when switching coordinators?
At least for the CC2652RB stick, the documentation says:

  • When migrating from another dongle (e.g. CC2531), make sure to modify your pan_id in your configuration, otherwise Zigbee2MQTT won’t start.

After I did that I could re-pair my Aqara sensors by holding the button until the blue led flashes.

3

Thanks for your reply!
Yes, i did change the panID:

payload ‘{“commit”:“6b32f30”,“coordinator”:{“meta”:{“maintrel”:1,“majorrel”:2,“minorrel”:7,“product”:1,“revision”:20200925,“transportrev”:2},“type”:“zStack3x0”},“log_level”:“info”,“network”:{“channel”:11,“extendedPanID”:“0xdddddddddddddddd”,“panID”:6754},“permit_join”:true,“version”:“1.16.1”}’

I was wondering wether this is the problem. I tried changing it back to
pan_id: 0x1a62
in the configuration.yaml, but as you see in the log above it still seem to use the changed pan_id.
I also deleted the database.db

Thanks,
Johannes